AHK should (with this) now have full DDE CLIENT FUNCTIONALITY. In fact, MORE FUNCTIONALITY than the windows DDE DLL (you are not limited to one conversation per topic per server.., full async and batch support).
1. Why would you want this power ??
check out these:
http://www.autohotkey.net/~Joy2DWorld/DDE/WRDBASIC.HLP
http://www.autohotkey.net/~Joy2DWorld/DDE/XLMACR8.HLP
2. Special Notes:
have been trying to get this done for A LONG LONG TIME...
see:
http://www.autohotkey.com/forum/topic14 ... hlight=dde
and
http://www.autohotkey.com/forum/topic17 ... hlight=dde
my own brain does not seem to like the philosphical approach taken by MS.. and so... meeting the MS requirements.. (getting things to work in windows.., is *not* my strongest side...)
this was only possible thanks to
Sean who filled in with the crucial and necessary exactness, the missing pieces of the puzzle... (like mis-defining memory as locked vs. moveable).
HUGE CREDIT for
Sean's help.
THANKS!!!
The DDE is wrapper actually not that complex, or hard to code up, but was haunted by all kinds of AHK issues... some of which (with the right opions set) still haunt the code....
This is not ready yet... not cleaned up enough... not with enough examples or instructions....
but I post it now, and will come back and clean up later.
(hope that's ok).
is WORKING and TESTED....
AMAZING STUFF with WORD and EXCELL...
SUPER SUPER EASY TO USE, and you have full control-->
exactly like using the old WORD BASIC....
just send a DDE command to do something... and it does it....
note it uses windows (above gui 20), for the connections.
DDE needs this.
each NEW connection can be in the *same* gui winow,
*EXCEPT* if you want multi-threaded conversations to SAME SERVER,
with same topic. To do that needs more gui windows... and so that is what we do... ..
HOW TO USE IT ?:
Quote:
Step 1: Connect to a DDE Server.
DDE_connection_Number1 := DDE_Connect("NAME_OF_DDE_SERVER","TOPIC_REQUESTED", OPTIONAL_CONNECTION_NUMBER_1_TO_20, OPTIONAL_HANDLE_OF_DDE_SERVER_WINDOW )
if you have more than one connection, you use the "DDE_connection_Number1", "DDE_connection_Number2" var to designate in Requests, Pokes, etc..
You can have up to 20 connections WITH THE SAME SERVER ON THE SAME TOPIC.
You do not need a new connection# for different Servers or Different topics!!!!
Step 2: Send a command:
result := DDE_Execute("[COMMAND YOU WANT TO SEND]", OPTIONAL_CONNECTION_ID_EG_DDE_connection_Number, OPTIONAL_DELAY_NUMBER)
note: you do not need to pay attention or use connection ID's unless you have multiple connections. THE LAST ACCESSED CONNECTION IS THE DEFAULT, SO DOES NOT NEED TO BE REDESIGNATED, UNLESS YOU WANT TO CHANGE IT.
also can:
result := DDE_Request("[COMMAND]", OPTIONAL_connection_ID, OPTIONAL_DELAY)
usually_not_one := DDE_Poke("[COMMAND]", "[DATASET FOR COMMAND]", OPTIONAL_connection_ID, OPTIONAL_DELAY)
Step 3: (when you're all done!) Terminate Connection
DDE_KILL("SERVER_NAME","TOPIC", OPTIONAL_CONNECTION_NUMBER)
DDE_KILL() = kills all open connectinos.
Super-Powers: (in additional to multiple connections to same server&topic)
1. You don't need to track open servers & topics, all done for you.
DDE_Connect(Server,Topic) to existing open topic on that server returns you the Conversation_ID contained in the "DDE_connection_Number1" variable in example above. ie. Connection_X := DDE_Connect(Server,Topic) fills Connection_X with the conversation ID for taht conversation. Can have multiple conversationID's for same topic/server if made on different DDE connection ports: eg. DDE_Connect(Server,Topic,2), etc.
2. BATCH MODE!
uses following Global Bars:
__DDE_Answer_Table = holds your batch responses. (You can clear & modify it.. but best to do it in a CRITICAL segment!! so not get accidental conflict with new data recepiet)
__DDE_BatchMode = Set this to use batch mode!!
if set, you do not get Answer := Request('[xxxx') instead answer goes only to answer table. IE NO DELAY WAITING FOR ANSWER!!!!!!
__DDE_Use_Answer_Table = you DO get an answer, and you ALSO build an answer table
__DDE_SafeMode = for multiple connection used at same time, etc. if set TRACKS MESSAGE INCOMING DATA AGAINST INTENDED CONNECTION and SERVER. This is **IMPORTANT** where you have data comming in from multiple servers and/or connections in NON-BATCH mode.
it makes sure that the answer you get actually comes from the CONNECTION and the SERVER you are expecting it to be from.
usage note: [and this is well beyond basic use.. if you want to control word, etc. likely this is not something you even need to read] __DDE_Use_Answer_Table and __DDE_SafeMode should be normal operation mode for multiple active servers & connections with much async data exchange.
if you seek specific response to command X... all other's will be either qued, or saved in the answer table....
3. Debug AHK stuff:
__DDE_UseAHKMessages set to use AHK sendmessage in place of DLL,
will cause crash (eventually)....
option to allow debugging... or
for those bored with too much stability....
EXSample
Code:
; this is just some test data used ... left as examples...
msgbox % DDE_Connect("WINWORD","System")
DDE_execute("[InsertField .Field = ""text""][insert ""testttt""][Insert ""this is also a execute test {enter}""]{enter}{enter}")
DDE_execute("[ViewZoom .ZoomPercent = 127][Insert ""Where was this added ?? NEW!""] {Enter} {Enter}")
DDE_Execute("[AppActivate ""Document1""]")
msgbox % DDE_Request("Topics") "`n" DDE_Request("System")
msgbox % DDE_Request("Formats")
DDE_Execute("[InsertFieldChars][Insert ""set ZZZ """"This is cool""""""]")
DDE_Execute("[CharRight][CharRight]")
DDE_Execute("[Insert chr$(13)]")
DDE_Execute("[InsertFieldChars]")
DDE_Execute("[Insert ""set BBB """"This is cool""""""]")
msgbox
DDE_exitapp() ; to close all open DDE transactions
Actual DDE LIBRARY FUNCTION CODE, ie.
COPY THIS AND SAVE IT AS "DDE.AHK" IN YOUR AHK 'LIB' DIRECTORY:Code:
/* ======================================================
Step 1: Connect to a DDE Server.
DDE_connection_Number1 := DDE_Connect("NAME_OF_DDE_SERVER","TOPIC_REQUESTED", OPTIONAL_CONNECTION_NUMBER_1_TO_20, OPTIONAL_HANDLE_OF_DDE_SERVER_WINDOW )
if you have more than one connection, you use the "DDE_connection_Number1", "DDE_connection_Number2" var to designate in Requests, Pokes, etc..
You can have up to 20 connections WITH THE SAME SERVER ON THE SAME TOPIC.
You do not need a new connection# for different Servers or Different topics!!!!
Step 2: Send a command:
result := DDE_Execute("[COMMAND YOU WANT TO SEND]", OPTIONAL_CONNECTION_ID_EG_DDE_connection_Number, OPTIONAL_DELAY_NUMBER)
note: you do not need to pay attention or use connection ID's unless you have multiple connections. THE LAST ACCESSED CONNECTION IS THE DEFAULT, SO DOES NOT NEED TO BE REDESIGNATED, UNLESS YOU WANT TO CHANGE IT.
also can:
result := DDE_Request("[COMMAND]", OPTIONAL_connection_ID, OPTIONAL_DELAY)
usually_not_one := DDE_Poke("[COMMAND]", "[DATASET FOR COMMAND]", OPTIONAL_connection_ID, OPTIONAL_DELAY)
Step 3: (when you're all done!) Terminate Connection
DDE_KILL("SERVER_NAME","TOPIC", OPTIONAL_CONNECTION_NUMBER)
DDE_KILL() = kills all open connectinos.
Super-Powers: (in additional to multiple connections to same server&topic)
1. You don't need to track open servers & topics, all done for you.
DDE_Connect(Server,Topic) to existing open topic on that server returns you the Conversation_ID contained in the "DDE_connection_Number1" variable in example above. ie. Connection_X := DDE_Connect(Server,Topic) fills Connection_X with the conversation ID for taht conversation. Can have multiple conversationID's for same topic/server if made on different DDE connection ports: eg. DDE_Connect(Server,Topic,2), etc.
2. BATCH MODE!
uses following Global Bars:
__DDE_Answer_Table = holds your batch responses. (You can clear & modify it.. but best to do it in a CRITICAL segment!! so not get accidental conflict with new data recepiet)
__DDE_BatchMode = Set this to use batch mode!!
if set, you do not get Answer := Request('[xxxx') instead answer goes only to answer table. IE NO DELAY WAITING FOR ANSWER!!!!!!
__DDE_Use_Answer_Table = you DO get an answer, and you ALSO build an answer table
__DDE_SafeMode = for multiple connection used at same time, etc. if set TRACKS MESSAGE INCOMING DATA AGAINST INTENDED CONNECTION and SERVER. This is **IMPORTANT** where you have data comming in from multiple servers and/or connections in NON-BATCH mode.
it makes sure that the answer you get actually comes from the CONNECTION and the SERVER you are expecting it to be from.
usage note: [and this is well beyond basic use.. if you want to control word, etc. likely this is not something you even need to read] __DDE_Use_Answer_Table and __DDE_SafeMode should be normal operation mode for multiple active servers & connections with much async data exchange.
if you seek specific response to command X... all other's will be either qued, or saved in the answer table....
3. Debug AHK stuff:
__DDE_UseAHKMessages set to use AHK sendmessage in place of DLL,
will cause crash (eventually)....
option to allow debugging... or
for those bored with too much stability....
*/ ;======================================================
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; HERE STARTS THE ACTUAL DDE WRAPPER ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;------------------ DDE CLIENT WRAPPER ---------------------------------------
DDE_Connect(DDE_Server,DDE_Topic = "", DDEConnection_ = 0, DDE_Init_To = 0xFFFF ) {
; DDE_Init_To = 0 to test to see if connection exists & activate as default
global
static DDE_Assigned_Messages
local nDDE_Topic, nAppli, Conversation, hAH , sDDE_Topic,sDDE_Server ; , hAHK
DDE_Connection_ReNumber(DDEConnection_)
if (DDE_Topic = "")
DDE_Topic := DDE_Server
if InStr(DDE_Topic . DDE_Server, "\E" , 1) {
sDDE_Topic := regexreplace(DDE_Topic,"\\E","\E\\E\Q")
sDDE_Server := regexreplace(DDE_Server,"\\E","\E\\E\Q")
} else {
sDDE_Topic = %DDE_Topic%
sDDE_Server = %DDE_Server%
}
DDE_Topic_List_Matchme :=
if regexmatch( __DDEM_DDE_Topic_List
, "\n\Q"
. sDDE_Topic
. "|"
. sDDE_Server
. "|"
. DDEConnection_
. "|\E"
. "(?<DDE_Server_ID>[^|]++)"
. "\|"
. "(?<Client_ID>[^`n]++)", __DDEM_ ) {
__Conversation_BASE := DDEConnection_
. "|"
. DDE_HEX(__DDEM_DDE_Server_ID)
. "|"
. DDE_HEX(__DDEM_Client_ID)
return __Conversation_BASE
} else if !DDE_Init_To
return
if __DDE_UseAHKMessages
DetectHiddenWindows, On
if !DDE_Assigned_Messages {
CF_TEXT := 1
WM_DDE_INITIATE := 0x3E0
WM_DDE_TERMINATE:= 0x3E1
WM_DDE_ADVISE := 0x3E2
WM_DDE_UNADVISE := 0x3E3
WM_DDE_ACK := 0x3E4
WM_DDE_DATA := 0x3E5
WM_DDE_REQUEST := 0x3E6
WM_DDE_POKE := 0x3E7
WM_DDE_EXECUTE := 0x3E8
__DDE_TableDiv := "`n$[_DDE_TABLE_DIV_]$"
__DDE_NULL := "$[_DDE_NULL_]$"
OnMessage(WM_DDE_ACK , "DDE_ACK")
OnMessage(WM_DDE_DATA, "DDE_DATA")
DDE_Assigned_Messages = 1
}
if !regexmatch(__DDEConnection_Table , "x)\n\Q"
. DDEConnection_
. "|\E"
. "(?<K>[^`n]++)", hAH )
{
Gui, %DDEConnection_%: +LastFound
Gui, %DDEConnection_%: Show, hide w1 h1 ,__DDEConnection_%DDEConnection_%
hAHK := WinExist()
__DDEConnection_Table .= "`n" . DDEConnection_ . "|" . DDE_HEX(hAHK) ; msgbox %
}
Ack_W =
nAppli := DllCall("GlobalAddAtom", "str", DDE_Server, "Ushort")
nDDE_Topic := DllCall("GlobalAddAtom", "str", DDE_Topic, "Ushort")
initWait := 120000
loop 10 {
sleep 500
if !__DDE_UseAHKMessages
DllCall("SendMessage", "UInt", DDE_Init_To, "UInt", WM_DDE_INITIATE , "UInt", hAHK , "UInt", nAppli | nDDE_Topic << 16)
else
SendMessage, WM_DDE_INITIATE, hAHK, nAppli | nDDE_Topic << 16,, ahk_id %DDE_Init_To%
;;
if (__DDEM_DDE_Server_ID := DDE_WaitA(hAHK, initWait))
break
}
DllCall("DeleteAtom", "Ushort", nAppli)
DllCall("DeleteAtom", "Ushort", nDDE_Topic)
if !(__DDEM_DDE_Server_ID)
return ( DDE__Tooltips(" ++DDE INITIALIZATION ERROR ". DDE_Topic . hAHK . "++ " , 6000, 4) * 0)
if !(__DDEM_Client_ID := Ack_Hwnd) { ; hAHK ; Ack_Hwnd
__DDEM_Client_ID := DDE_HEX(hAHK)
DDE__Tooltips("++DDE CLIENT HANDLE INITIALIZATION ERROR ". hAHK . " ++" , 3000, 3)
}
Conversation :=DDEConnection_
. "|"
. DDE_HEX(__DDEM_DDE_Server_ID)
. "|"
. DDE_HEX(__DDEM_Client_ID)
__DDEM_DDE_Topic_List .= "`n"
. DDE_Topic
. "|"
. DDE_Server
. "|"
. Conversation
Return (__Conversation_BASE := Conversation )
}
; :::::::::::::::::::::::::::::::::::::::::::::::::::::::::
DDE_Select( byref Conversation) {
global
if ( Conversation or (Conversation := __Conversation_BASE) ) and Regexmatch(Conversation, "^(?<Connection>[^|]++)\|(?<__DDE_Server_ID>[^|]++)\|(?<Client_ID>.++)$", __DDEM_)
return 1
}
DDE_Connection_ReNumber(byref DDEConnection) {
if !DDEConnection or (DDEConnection < 1) or (DDEConnection > 21)
DDEConnection := 20
else
DDEConnection += 20
}
DDE_Wait(byRef Var, max = 120000) {
loop %max% {
if (Var <> "")
break
AX++
}
if ( AX < MAX ) ; ie. loop count
return Var ; A
}
DDE_WaitS(byRef VarKey, KeyValue, max = 120000) {
loop %max% {
if (VarKey = KeyValue)
break
AX++
}
if ( AX < MAX ) ; ie. loop count
return 1
}
DDE_WaitA(Var, max = 60000) {
global Ack_Hwnd,Ack_W
; max =60000
loop %max% { ; 1200000 {
if (Var = Ack_Hwnd)
break
AX++
}
if ( AX < MAX ) ; ie. loop count
return Ack_W
}
DDE_Request(Item, Conversation = "", delay = 90000) {
local hItem
if !DDE_Select( Conversation)
return DDE__Tooltips(" DDE UNDEFINED DDE REQUEST ERROR ". Conversation . " ** " , 6000, 3)
hItem := DllCall("GlobalAddAtom", "str", Item, "Ushort")
DDE__myAnswer =
DDE__myAnswerKey =
DDE__Data_Title =
if !__DDE_UseAHKMessages
DllCall("PostMessage", "UInt", __DDEM___DDE_Server_ID, "UInt", WM_DDE_REQUEST , "UInt", __DDEM_Client_ID , "UInt", CF_TEXT | hItem << 16)
else
PostMessage, WM_DDE_REQUEST, __DDEM_Client_ID, CF_TEXT | hItem << 16,, ahk_id %__DDEM___DDE_Server_ID%
DllCall("DeleteAtom", "Ushort", hItem)
if __DDE_BatchMode ; ie. no waiting... just >> __DDE_Use_Answer_Table
return
If DDE_SafeMode
return DDE_WaitS(DDE__myAnswerKey, __DDEM_Client_ID . "|" . __DDEM___DDE_Server_ID, delay) ? DDE__myAnswer : ""
else if (DDE_Wait(DDE__myAnswer, delay) = "$[_~~::NULL::~~_]$")
return
return DDE__myAnswer
}
DDE_Poke(item= "", data = "", Conversation = "", delay = 20000 ) {
Global
local hItem,hData,pData, lParam
if !DDE_Select( Conversation)
return DDE__Tooltips(" DDE UNDEFINED DDE POKE ERROR ". Conversation . " ** " , 6000, 3)
DDE__myAnswer =
Ack_Hwnd =
DDE__Data_Title =
If SubStr(Data, -1) <> "`r`n"
Data .= "`r`n"
hItem := DllCall("GlobalAddAtom", "str", Item, "Ushort")
hData := DllCall("GlobalAlloc", "Uint", 0x0002, "Uint", 2+2+StrLen(Data)+1)
pData := DllCall("GlobalLock" , "Uint", hData)
DllCall("ntdll\RtlFillMemoryUlong", "Uint", pData, "Uint", 4, "Uint", 1<<13|1<<16)
DllCall("lstrcpy", "Uint", pData+4, "Uint",&Data)
DllCall("GlobalUnlock", "Uint", hData)
lParam := DllCall("PackDDElParam", "Uint", WM_DDE_POKE, "Uint", hData, "Uint", hItem)
if !__DDE_UseAHKMessages
DllCall("PostMessage", "UInt", __DDEM___DDE_Server_ID, "UInt", WM_DDE_POKE , "UInt", __DDEM_Client_ID , "UInt", lParam)
else
PostMessage, WM_DDE_POKE, __DDEM_Client_ID, lParam,, ahk_id %__DDEM___DDE_Server_ID%
If ErrorLevel
{
DllCall("DeleteAtom", "Ushort", hItem)
; DllCall("GlobalFree", "Uint" , hData)
; DllCall("FreeDDElParam", "Uint", WM_DDE_POKE, "Uint", lParam)
}
return DDE_WaitA(__DDEM_Client_ID, delay)
}
DDE_Execute(item, Conversation = "", delay = 60000) {
Global
local hCmd, pCmd
; WM_DDE_EXECUTE,__DDEM_Client_ID,__DDEM___DDE_Server_ID, DDE__myAnswer, Ack_Hwnd
if !DDE_Select( Conversation)
return DDE__Tooltips(" UNDEFINED DDE EXECUTE ERROR ". Conversation . " ** " , 6000, 3)
hCmd := DllCall("GlobalAlloc", "Uint", 0x0002, "Uint", StrLen(item)+1)
pCmd := DllCall("GlobalLock" , "Uint", hCmd)
DllCall("lstrcpy", "Uint", pCmd, "str",item)
DllCall("GlobalUnlock", "Uint", hCmd)
DDE__myAnswer =
Ack_Hwnd =
DDE__Data_Title =
if !__DDE_UseAHKMessages
DllCall("PostMessage", "UInt", __DDEM___DDE_Server_ID, "UInt", WM_DDE_EXECUTE , "UInt", __DDEM_Client_ID , "UInt", hCmd)
else
PostMessage, WM_DDE_EXECUTE, __DDEM_Client_ID, hCmd,, ahk_id %__DDEM___DDE_Server_ID%
;If ErrorLevel
; DllCall("GlobalFree", "Uint", hCmd)
return DDE_WaitA(__DDEM_Client_ID, delay )
}
DDE_ACK(wParam, LParam, MsgID, hWnd) {
Critical 24
global Ack_W,Ack_L,Ack_Hwnd,Ack_MsgID
Ack_W := wParam
Ack_L := LParam
Ack_MsgID := MsgID
Ack_Hwnd := hWnd
}
DDE_DATA(wParam, lParam, MsgID, hWnd) {
Critical 250
Global WM_DDE_ACK, DDE__myAnswer , DDE__myAnswerKey, DDE_SafeMode,__DDE_BatchMode, Data_MsgID, DDE__Data_Title , __DDE_NULL, __DDE_Answer_Table,__DDE_Use_Answer_Table, __DDE_TableDiv,__DDE_UseAHKMessages ; , sInfo
nITem = "Defined!"
DllCall("UnpackDDElParam", "Uint", MsgID, "Uint", lParam, "UintP", hData, "UINTP", nItem)
DllCall( "FreeDDElParam", "Uint", MsgID, "Uint", lParam)
pData := DllCall("GlobalLock", "Uint", hData)
VarSetCapacity(sInfo, DllCall("lstrlen", "Uint", pData+4))
DllCall("lstrcpy", "str", sInfo, "Uint", pData+4)
DllCall("GlobalUnlock", "Uint", hData)
If (*(pData+1) & 0x20)
DllCall("GlobalFree", "Uint", hData)
If (*(pData+1) & 0x80) {
if !__DDE_UseAHKMessages
DllCall("PostMessage", "UInt", wParam, "UInt", WM_DDE_ACK , "UInt", hWnd , "UInt", 0x80 << 8 | nItem << 16)
else {
DetectHiddenWindows, On
PostMessage, WM_DDE_ACK, hWnd, 0x80 << 8 | nItem << 16,, ahk_id %wParam%
}
}
Data_MsgID := MsgID
DDE__Data_Title := "Undefined!"
DllCall("GlobalGetAtomName", "UintP", nItem, "STR", DDE__Data_Title, "SHORT", 512)
DDE__myAnswer := sInfo
if (DDE__myAnswer = "") and !DDE_SafeMode
DDE__myAnswer := __DDE_NULL
DDE__myAnswerKey := DDE_HEX(hWnd) . "|" . DDE_HEX(wParam)
if ( __DDE_BatchMode or __DDE_Use_Answer_Table )
__DDE_Answer_Table .= __DDE_TableDiv
. DDE__myAnswerKey
. "|"
. DDE__Data_Title
. "|"
. DDE__myAnswer
return 0
}
DDE_KILL(__DDE_Server="",__DDE_Topic = "", __DDE_DDEConnection_ = 0) {
local s__DDE_Topic,s__DDE_Server
DDE_Connection_ReNumber( __DDE_DDEConnection_)
if (__DDE_Server = "") {
Loop, Parse, __DDEM_DDE_Topic_List ,`n
{
if !A_loopfield
continue
if regexmatch(A_Loopfield, "(?<__DDE_Topic>[^|]++)"
. "\|"
. "(?<__DDE_Server>[^|]++)"
. "\|"
. "(?<DDEConnection>[^|]++)",Kill_) and (!__DDE_No_mass_Termination)
DDE_KILL(Kill___DDE_Server,Kill___DDE_Topic, Kill_DDEConnection - 20)
}
__DDEM_DDE_Topic_List =
__DDEConnection_Table =
return
}
if (__DDE_Topic = "")
__DDE_Topic := __DDE_Server
if InStr(__DDE_Topic . __DDE_Server, "\E" , 1) {
s__DDE_Topic := regexreplace(__DDE_Topic,"\\E","\E\\E\Q")
s__DDE_Server := regexreplace(__DDE_Server,"\\E","\E\\E\Q")
} else {
s__DDE_Topic = %__DDE_Topic%
s__DDE_Server = %__DDE_Server%
}
if regexmatch(__DDEM_DDE_Topic_List
, "\n\Q"
. s__DDE_Topic
. "|"
. s__DDE_Server
. "|"
. __DDE_DDEConnection_
. "|\E"
. "(?<__DDE_Server_ID>[^|]++)"
. "\|"
. "(?<Client_ID>[^`n]++)", __DDEM_)
__DDEM_DDE_Topic_List := regexreplace(__DDEM_DDE_Topic_List,"x)"
. "\n"
. "[^|]+" ; __DDE_Topic
. "\|"
. "[^|]+" ; __DDE_Server
. "\|"
. "[^|]+" ; any connection.. (is same id#s!!!)
. "\Q|"
. __DDEM___DDE_Server_ID
. "|"
. __DDEM_Client_ID
. "\E(?=\n|$)" , "")
if __DDE_Kill_window_on_Kill and !regexmatch(__DDEM_DDE_Topic_List, "x)"
. "\n"
. "[^|]+"
. "\|"
. "[^|]+"
. "\|\Q"
. __DDE_DDEConnection_
. "|\E" , __DDEM_)
{
__DDEConnection_Table := regexreplace(__DDEConnection_Table,"\n\Q" . __DDE_DDEConnection_ . "|\E[^`n]++","")
if ( __DDE_DDEConnection_ > 20) and ( __DDE_DDEConnection_ < 51)
Gui, %__DDE_DDEConnection_%: destroy
}
if __DDEM___DDE_Server_ID {
if !__DDE_UseAHKMessages
DllCall("PostMessage", "UInt", __DDEM___DDE_Server_ID, "UInt", WM_DDE_TERMINATE , "UInt", hAHK , "Int", 0)
else {
DetectHiddenWindows, On
PostMessage, WM_DDE_TERMINATE, hAHK , 0,,ahk_id %__DDEM___DDE_Server_ID%
}
} else
return DDE__Tooltips( " ++DDE UNDEFINED TERMINATION ERROR ". __DDE_Topic . "|" . __DDE_Server . " " . __DDE_DDEConnection_ " ** " , 4000,3)
if __DDEM_DDE_Topic_List
regexmatch(__DDEM_DDE_Topic_List, "\n"
. "[^|]++"
. "\|"
. "[^|]++"
. "\|"
. "(?<Connection_>[^|]++)"
. "\|"
. "(?<M___DDE_Server_ID>[^|]++)"
. "\|"
. "(?<M_Client_ID>[^|]++)"
. "$", DDE)
if __DDEM___DDE_Server_ID
__Conversation_BASE := __DDE_DDEConnection_
. "|"
. hex ( __DDEM___DDE_Server_ID )
. "|"
. hex ( __DDEM_Client_ID )
}
DDE_exitapp() {
DDE_KILL()
exitapp
}
DDE__Tooltips(text = "", delay = 3000, id = 1, x = "", y = "") {
if (id < 1) or (id > 5)
id := 1
delay := (delay) ? delay : 3000
ToolTip, %text%,%x%,%y%,%id%
if text
SetTimer, DDE__RemoveToolTip%id%, %delay%
return 1 ; ie. is set
}
DDE__RemoveToolTips(id = 1) {
if (id < 1) or (id > 5)
id := 1
SetTimer, DDE__RemoveToolTip%id%, Off
ToolTip,,,,%id%
return
DDE__RemoveToolTip1:
DDE__RemoveToolTips(2)
return
DDE__RemoveToolTip2:
DDE__RemoveToolTips(2)
return
DDE__RemoveToolTip3:
DDE__RemoveToolTips(3)
return
DDE__RemoveToolTip4:
DDE__RemoveToolTips(4)
return
DDE__RemoveToolTip5:
DDE__RemoveToolTips(5)
return
}
DDE_hex(HEXME_number) {
if ((format := A_FormatInteger) != "H") {
SetFormat Integer, Hex
HEXME_number := round(HEXME_number) + 0
SetFormat Integer, %format%
return HEXME_number
} else
return HEXME_number + 0
}
;
; v1.08 [3/20/10]
;
; Copr. 2007,2010. See License.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; END OF DDE CLIENT WRAPPER ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
Login
Register
FAQ
Search
