The above is a FullScreen Snapshot taken with the screen resolution set @ 640x480x16m
[*:2vxprq7v]The SlideShow.exe runs Fullscreen with Slides sized @ 80% of the Desktop area.
The background is filled with a 3x3 Bitmap Gradient.
[*:2vxprq7v]The SlideShow.exe is sized @ a whopping 5.31 MB as it contains 94 JPEG Images totalling to 5.17 MB.
The list of files that will be unpacked (FileInstall) to your TEMP folder (on the first run) is here.
It takes considerable seconds to unpack all those files.
[*:2vxprq7v]SlideShow.exe takes a few seconds to load everytime it is run and will be displaying the following message centered on the screen:
[/list]
The delay is caused by Eminem-Mocking_Bird.mid which takes a few seconds to load into the memory.
[*:2vxprq7v]SlideShow.exe will not run properly without a SoundCard.
[*:2vxprq7v]SlideShow.exe does not display a TrayIcon and the user can press thekey once to terminate it.
If there is an image transition on, the thread is not interuppted immediately and SlideShow.exe will be terminated as soon as the transition is complete. So, press thekey just once - and wait for the program to terminate.
[*:2vxprq7v]The concept for this project has been adapted from the Shareware software: Slide Show To Go - 7
[*:2vxprq7v]Visit TipsNTricks: How to Animate a GUI ? which elaborates the technique used.
[*:2vxprq7v]Download SlideShow.exe [5.31 MB].
Edit: 04-Jul-2006
[*:2vxprq7v] To Unpack the Source Code & all files run SlideShow.exe /ExtractSource
[/list]Can someone check out SlideShow.exe for me in Windows 98 SE ? Please!
Regards ,
Crazy Scripting : Photo SlideShow created with AutoHotkey
Anyways!
The following will unpack all the files - including source to a sub-folder named Source:
Run, SlideShow.exe /ExtractSource
The executable was not password encrypted so EXE2AHK would also work, but using /ExtractSource will make things more understandable and easier to adapt.
Again: Someone, please let me know if it works with Windows 98.
Regards,
I have about 250 from a wedding that I would like to use. I have already made greyscale images of them and they correspond to the names of the colour photos.
I really don't want to spend an hour copying/pasting text in the ImageList.txt file.
Is there an easier way to add to this list through dialog boxes?
E.g. It can ask:
[*:38acxl9d]How many photos do you have? 250
[*:38acxl9d]What is the prefix name of the photos? wedding
[*:38acxl9d]What special effects do you want to apply to the photos?
Random, all the same? RandomThe result would then produce a text file:
wedding001a.JPG; 1000; 1000; ROLL_LEFT_TO_RIGHT
wedding001b.JPG; 2000; 4200; FADE_IN
wedding002a.JPG; 1000; 2000; ROLL_RIGHT_TO_LEFT
wedding002b.JPG; 2000; 4200; FADE_IN
wedding003a.JPG; 1000; 2000; ROLL_TOP_TO_BOTTOM
wedding003b.JPG; 2000; 4200; FADE_IN
...
wedding248a.JPG; 1000; 2000; ROLL_DIAG_TR_TO_BL
wedding248b.JPG; 2000; 4200; FADE_IN
wedding249a.JPG; 1000; 2000; ROLL_DIAG_BL_TO_TR
wedding249b.JPG; 2000; 4200; FADE_IN
wedding250a.JPG; 1000; 2000; ROLL_DIAG_BR_TO_TL
wedding250b.JPG; 2000; 4200; FADE_IN
Is my only way to cut and paste?
Hope you can help.
How can I make my own list of photos?
I have about 250 from a wedding that I would like to use. I have already made greyscale images of them and they correspond to the names of the colour photos.
I really don't want to spend an hour copying/pasting text in the ImageList.txt file.
Is there an easier way to add to this list through dialog boxes?
:shock: 500 Photos ?!!
I am afraid that the loop I have used in SlideShow.exe will hit the maximum number of 99.
This is a limitation of the Gui Command. However, since we can destroy and recreate GUI's, I will
have to work on a different loop structure! Please allow sometime I will post a better version.
Simply put, right now the loop will handle only 49 Color Photos + 49 B&W Photos. Be warned that,
even If it is possible to FileInstall 500 Photos @ 640x480, The final executable size may be sized around 25 MB !!!
This being informed, let me share with you some code that I used to automate the process when I was working
in the project. I put a list of effects in file named Effect.txt and processed it from CreateImageList.ahk
to create ImageList.txt.
Here are the contents of Effect.txt:
ROLL_LEFT_TO_RIGHT
ROLL_RIGHT_TO_LEFT
ROLL_TOP_TO_BOTTOM
ROLL_BOTTOM_TO_TOP
ROLL_DIAG_TL_TO_BR
ROLL_DIAG_TR_TO_BL
ROLL_DIAG_BL_TO_TR
ROLL_DIAG_BR_TO_TL
SLIDE_LEFT_TO_RIGHT
SLIDE_RIGHT_TO_LEFT
SLIDE_TOP_TO_BOTTOM
SLIDE_BOTTOM_TO_TOP
SLIDE_DIAG_TL_TO_BR
SLIDE_DIAG_TR_TO_BL
SLIDE_DIAG_BL_TO_TR
SLIDE_DIAG_BR_TO_TL
ZOOM_IN
Here are the contents of CreateImageList.ahk:
FileDelete, ImageList.txt OddTrans =1000 OddDurn =2000 EvenTrans=2000 EvenDurn =4000 Once=1 Loop, *.jpg { If Once { Files:=A_LoopFileName Once=0 } else Files:=Files . "`n" . A_LoopFileName } Sort, Files Snum=1 ODD=1 Loop, Parse, Files, `n { Part1:=A_LoopField IF ODD { FileReadLine, Part2, Effect.txt, %Snum% If Errorlevel <> 0 { FileReadLine, Part2, Effect.txt, 1 Snum=1 } else SNum+=1 FileAppend, %Part1%`; %OddTrans%`; %OddDurn%`; %Part2% `n, ImageList.txt ODD=0 } else { part2:="FADE_IN" FileAppend, %Part1%`; %EvenTrans%`; %EvenDurn%`; %Part2% `n, ImageList.txt ODD=1 } } Return
Put both the files into the Images Folder and run CreateImageList.ahk to create ImageList.txt.
If you do not want a particular effect remove it from effect.txt. You may alter the order of effect.txt to suit your needs.
The following code (CodeCreate.ahk) will auto-generate code for File-Installing the images.
;CodeCreate.ahk FileDelete, Code.txt Loop, 48 { Filea= % "Slide" NumStr(A_Index,2,0,"0") "a.jpg" Fileb= % "Slide" NumStr(A_Index,2,0,"0") "b.jpg" FileAppend, IfNotExist`, `%Target`%\%Filea% `n, code.txt FileAppend, %A_Space%FileInstall`, Images\%Filea%`, `%Target`%\%Filea% `n, code.txt FileAppend, IfNotExist`, `%Target`%\%Fileb% `n, code.txt FileAppend, %A_Space%FileInstall`, Images\%Fileb%`, `%Target`%\%Fileb% `n`n, code.txt } Run code.txt Return NumStr(Value,Width,Dec,PadB4="") { SetFormat, float, .%Dec% Value+=0 Loop, { if (StrLen(Value) < Width AND PadB4!="") Value = % PadB4 Value else break } Return Value }
You will have change "Slide" into "Wedding" and Loop, 48 as required,
Run this file and Copy / Paste the result into InstallImages() in SlideShow.ahk
I always wanted to create a SlideShow in AHK and when I discovered AnimateWindow function,
I was very happy and created this SlideShow in haste, to demonstrate the power of said function.
Creating a Front-end GUI for this might not be very difficult ... but not with lacklustre interest shown by the community.
Please allow me sometime.
I will post a reconstructed SlideShow.exe that will not suffer from the GUI upperlimit of 99 windows.
Regards,
What is nice if you can get the limit above 48, is it could be put on a CD for granparents, neighbour etc.
It is simple yet effective SlideShow.
Thanks very much.
Thanks. I will see if I can just do 48 for now but will try your automated procedure.
What is nice if you can get the limit above 48, is it could be put on a CD for granparents, neighbour etc.
It is simple yet effective SlideShow.
Thanks very much.
The altered script is here: SlideShow.ahk / Preview code as Text. ( It was not as hard as I thought it would be!. :shock: )
Download SlideShow.ahk and replace it with the original. The loop should support any number of images now.
I have not tested it compiled. Please test this and give me feedback so that I can update SlideShow.exe.
Since your wedding photos uses 3 digit numbering, alter lines in CodeCreate.ahk as follows:
Filea= % "Wedding" NumStr(A_Index,3,0,"0") "a.jpg" Fileb= % "Wedding" NumStr(A_Index,3,0,"0") "b.jpg"
BugFix: I blundered by forgetting to close the open midifile, which has now been rectified.
Regards,
Ie.. just supply a folder name and it will do a slideshow of the folder..
Thanks.
I need it to start with a particular file, and then move on randomly/sequentially to other photos in the folder after x seconds.
Perhaps something like:
PhotoLayer1: <<put 1st photoset here>> Return PhotoLayer2: <<put 2nd photoset here>> Return PhotoLayer3: <<put 3rd photoset here>> Return etc...Then a gosub for each one and releasing the previous set of 49.
Also, in your code, you have:
IfNotExist, %Target%\Slide01a.jpg FileInstall, Images\Slide01a.jpg, %Target%\Slide01a.jpg IfNotExist, %Target%\Slide01b.jpg FileInstall, Images\Slide01b.jpg, %Target%\Slide01b.jpg IfNotExist, %Target%\Slide02a.jpg FileInstall, Images\Slide02a.jpg, %Target%\Slide02a.jpg IfNotExist, %Target%\Slide02b.jpg FileInstall, Images\Slide02b.jpg, %Target%\Slide02b.jpg IfNotExist, %Target%\Slide03a.jpg FileInstall, Images\Slide03a.jpg, %Target%\Slide03a.jpg IfNotExist, %Target%\Slide03b.jpg FileInstall, Images\Slide03b.jpg, %Target%\Slide03b.jpg etc...
Is there a reason why a "loop" won't work for this?
loop, 49 { IfNotExist, %Target%\Slide%a_index%a.jpg FileInstall, Images\Slide%a_index%a.jpg, %Target%\Slide%a_index%a.jpg IfNotExist, %Target%\Slide%a_index%b.jpg FileInstall, Images\Slide%a_index%b.jpg, %Target%\Slide%a_index%b.jpg }I mean, aside from the "0" {Slide01a.jpg}, which can be removed from the file name or added in the context of the code.
This is an interesting script {and I do like messing around with 'em to see what I can do} so I'll be checking it out as I can, but that limit piqued my curiosity a tad bit.
Dra'Gon
For a good laugh {hopefully} >> megamatts.50megs.com
My WritersCafe profile>>
http://www.writersca...BlueDragonFire/
I'm curious about that limit on the number of photos. I haven't tried monkeying with your script yet {I'll get to it soon } but what if you used "layers" {I don't know how it should be called but that word fits, I think}?
The altered script is here: SlideShow.ahk / Preview code as Text. ( It was not as hard as I thought it would be!. :shock: )
Download SlideShow.ahk and replace it with the original. The loop should support any number of images now.
I have not tested it compiled. Please test this and give me feedback so that I can update SlideShow.exe.
Is there a reason why a "loop" won't work for this?
FileInstall - Help, says
"The file name must not contain double quotes, variable references (e.g. %A_ProgramFiles%), or wildcards."
Thanks for testing.
Is the picture of the girl included :?:
Yes! That is "Laetitia Casta" and the first slide of the show.
.. and except for that, the show is themed on nature.
Yeeey... downloading...
Just in case you escape'd before the app loaded.
Did you try it? Much to my surprise it takes longer time to load in XP but was quicker in 98/2K.