BoBoĻ
Guest
|
 Posted: Fri Mar 07, 2008 8:40 pm Post subject: MixMP3 - Capture a sound from your sound card [CMD] |
 |
|
MixMP3 | Code: | ... is a coder of the sound information in a popular format mp3 from a sound card. If to be more exact, it not the high-grade coder, and only a superstructure above Lame engine or Fraunhofer acm codec. The program allows to write down the sound information directly from a sound card on a hard disk in a mp3-format in real time if opportunities of the equipment certainly allow. The program is executed as a console application.
2. Features.
- Recording the sound information in the mp3-format with bitrates
8, 16, 20, 24, 32, 40, 48, 56, 64, 80, 96, 112, 128, 144, 160, 192, 224, 256 or 320 kbps;
16 bits; 8, 11, 12, 16, 22, 24, 32, 44 or 48 kHz, in stereo mode, joint-stereo or mono mode.
(see keys -b, -d, -m).
- Automatic cutting pauses on the given level (-s).
- Automatic it is cut mp3 a stream on files four various ways, including on pauses (-split1..4).
- Possibility of choice used encoder - lame or fhg layer-III acm codec (should be installed in the system) (-fhg).
- Operation in the spy mode when the window of the program is invisible (-hide).
- Recording with sampling rate 64 or 96 kHz from a sound card (it is interesting, if somebody have one?:).
Thus forms mp3 the file(s) with sampling rate 48 kHz :) Only for lame.
- Choice of quality of coding - high, low, normal. Only for lame. (-ql, -qh).
- Termination after a given period of time. Time is set in minutes (there can be a fractions of minutes) (-t).
- Installation of the increased priority for encoder. Actually by operation in Win9X (-a).
- The exit on appearance of the given file-flag (-x).
- Automatic deleting of a constant component of a signal (-dc for disable).
- Usage of lame mode - ABR (average bitrate) (-abr).
- Usage of lame mode - VBR (variable bitrate) (-vbr).
- Possibility of a program control from other applications (see interproc.h, mmp3_monitor.cpp).
- High "competitiveness" for system resources in multitasking environment.
- Playback of mp3-stream (-play).
3. System requirements.
The operating system: Windows NT 4, a Windows 2000 or a Windows 9X/ME;
The processor: iP-200 (mono mode or poor quality) or iCeleron 333 (stereo with excellence);
for an effective utilization fhg encoder need the processor with clock rate not less 600 MHz;
The RAM: 32 Mb;
The Sound: a 16-bit sound card. |
[Home]  |
|
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
