Dra_Gon
Joined: 25 May 2007
Posts: 373
|
 Posted: Fri Dec 12, 2008 5:24 pm Post subject: |
 |
|
I just found this in the Docs. I don't know if it will help get the fn key info, but it might:
| Help Docs wrote: | Special Keys
If your keyboard or mouse has a key not listed above, you might still be able to make it a hotkey by using the following steps (requires Windows XP/2000/NT or later):
Ensure that at least one script is running that is using the keyboard hook. You can tell if a script has the keyboard hook by opening its main window and selecting "View->Key history" from the menu bar.
Double-click that script's tray icon to open its main window.
Press one of the "mystery keys" on your keyboard.
Select the menu item "View->Key history"
Scroll down to the bottom of the page. Somewhere near the bottom are the key-down and key-up events for your key. NOTE: Some keys do not generate events and thus will not be visible here. If this is the case, you cannot directly make that particular key a hotkey because your keyboard driver or hardware handles it at a level too low for AutoHotkey to access. For possible solutions, see further below.
If your key is detectible, make a note of the 3-digit hexadecimal value in the second column of the list (e.g. 159).
To define this key as a hotkey, follow this example:
SC159:: ; Replace 159 with your key's value.
MsgBox, %A_ThisHotKey% was pressed.
returnReverse direction: To remap some other key to become a "mystery key", follow this example:
; Replace 159 with the value discovered above. Replace FF (if needed) with the
; key's virtual key, which can be discovered in the first column of the Key History screen.
#c::Send {vkFFsc159}Alternate solutions: If your key or mouse button is not detectible by the Key History screen, one of the following might help:
Reconfigure the software that came with your mouse or keyboard (sometimes accessible in the Control Panel or Start Menu) to have the "mystery key" send some other keystroke. Such a keystroke can then be defined as a hotkey in a script. For example, if you configure a mystery key to send Control+F1, you can then indirectly make that key as a hotkey by using ^F1:: in a script.
Try searching the forum or asking for help there. There may be ways to detect certain keys and buttons using techniques such as DllCall, OnMessage, and RegisterRawInputDevices.
The following is a last resort and generally should be attempted only in desperation. This is because the chance of success is low and it may cause unwanted side-effects that are difficult to undo:
Disable or remove any extra software that came with your keyboard or mouse or change its driver to a more standard one such as the one built into the OS. This assumes there is such a driver for your particular keyboard or mouse and that you can live without the features provided by its custom driver and software. |
Ciao,
Dra'Gon
_________________
For a good laugh {hopefully} >> megamatts.50megs.com
My WritersCafe profile>>
http://www.writerscafe.org/writers/BlueDragonFire/ |
|
FAQ
Search
Memberlist
Register
Profile
Log in to check your private messages
Log in
