AutoHotkey Community

toralf · Joined: 31 Jan 2005 Posts: 3842 Location: Bremen, Germany

I guess you are right. It might have to do with regional settings.
My "<" is left of your "z" if you have a "qwerty" keyboard. I have a "qwertz" (german) keyboard.
I could set the shortcuts depending on system language. Which shortcuts would you like to have on your keyboard? I used mainly shortcuts for the left hand only. (OutputDebug is the only exception)
_________________
Ciao
toralf

easye · Joined: 07 Dec 2006 Posts: 6 Location: U.S.A.

toralf · Joined: 31 Jan 2005 Posts: 3842 Location: Bremen, Germany

I wouldn't just do it for you. But there are more people out there with a qwerty keyboard then a qwertz. So I have to make a change to the code. Please tell me which shortcuts you find useful after a while of use. Test different short cuts.
_________________
Ciao
toralf

easye · Joined: 07 Dec 2006 Posts: 6 Location: U.S.A.

Ok, I'll let you know what I find.

On a different note:
Previously I could highlight a few lines of AHK code and press F9 to run just those lines. Ever since installing this script, when I press F9 it runs the entire script rather than just the section that I have highlighted.

I imagine this is by design since you have a setting in the gui for F9 to run script "with log and parser".

Is there any way to access the original way of doing it?

Thanks.

toralf · Joined: 31 Jan 2005 Posts: 3842 Location: Bremen, Germany

I never came across that feature. Was it a standard feature of PSPad? It is possible to do it with a different program or script. Have you customized PSPad in any way, or run a different script to do it? Maybe it was a PSPad script (although I didn't find any on the PSPad extension page). Since I do not know where this feature came from I do not know how to get it back.

To recreate this feature a hotkey in PSPad would call a different app/script and give the selected code (%SelText%) as a command line parameter (not sure how this will work with multiple lines of code). The app/script would take the code save it to a temporary file and run it with RunWait and delete the file afterwards.

How often have you used this "partial run"?
_________________
Ciao
toralf

easye · Joined: 07 Dec 2006 Posts: 6 Location: U.S.A.

SanskritFritz · Joined: 17 Feb 2005 Posts: 283 Location: Hungary, Budapest

SamuelPlentz · Joined: 26 Jul 2006 Posts: 8

If i install the script into the beta of PSPad the ability to use the Codeexplorer is lost. I think the script has to be adjusted.

I wrote an correction request concerning the hot keys to the author.

I love this script Very Happy

_________________
www.SamuelPlentz.de.vu

nduncan · Joined: 06 Dec 2005 Posts: 32 Location: Madrid, Spain

Some help needed!

I have PSPad version: 4.5.2 (2241) and AutoHotkey 104608 so I think I am up-to-date.

I have just downloaded Install_AHK_for_PSPad_v2.zip, extracted the files to C\:Temp and made what seemed to be a good default installation from there.

However I can't access the toolbar, because Alt+F9 opens AU Window Spy instead.

It would help if I knew the name of the AHK Toolbar file, as I could make an independent hotkey to access it. However, I have made several unsuccessful searches for it.

It must be something simple.
_________________
tryingharder

toralf · Joined: 31 Jan 2005 Posts: 3842 Location: Bremen, Germany

To change the hotkey after installation, you can go to :

Settings > Program Settings > Key Map > File > aRunX

Where the X in aRunX is the number of the external application, specified at:
Settings > Highlighters Setting > AutoHotkey > External Application
_________________
Ciao
toralf

nduncan · Joined: 06 Dec 2005 Posts: 32 Location: Madrid, Spain

Toralf,

Thanks for your quick reply. It is fine as far as it goes, but not being able to find the toolbar file, I can't yet add it as an external application.

What is its name?

toralf · Joined: 31 Jan 2005 Posts: 3842 Location: Bremen, Germany

Sorry, I do not understand what you mean by "toolbar file".
_________________
Ciao
toralf

Titan · Joined: 11 Aug 2004 Posts: 5067 Location: imaginationland

I ran this script to configure my PSPad and I'm happy with the function highlighting and automatic brace/indent completion. However I did have a couple problems: if there is a syntax error AutoHotkey closes and the log shows:

Also none of the non-standard hotkeys like Ctrl+< work, ^<::MsgBox responds normally though. I can't seem to run temporary files either, #SingleInstance off is broken too. Previously I could paste or type in commands to a new file and it would run in the Temp directory, but now I have to save every file.
_________________

RegExReplace("irc.freenode.net/ahk", "^(?=(.(?=[\0-r\[]*((?<=\.).))))(?:[c-\x73]{2,8}(\S))+((2)|\b[^\2-]){2}\D++$", "$u3$1$3$4$2")

Homer · Joined: 12 Jan 2006 Posts: 62 Location: Dallas, Texas

I'm in the same boat as Titan. How do I turn off the Log window from showing up with each compile and turn off the "Save" before compile setting. I see the checkbox for the "Save" before compile setting but as I uncheck it and click OK to exit the dialog window, the setting it checked again when I go back into the window.

Homer