AutoHotkey Community

raron

@ evilC

Great stuff! Just confirming that it works.
(Except preview in UCR)

raron

I hadn't updated in a while, so I didn't know when re-use broke. I just randomly decided to try to update it now :) But I briefly tested UCR Alpha 0.0.16 through Alpha 0.1.12 just now. I used the latest vJoy I installed (vJoy 2.1.8.33), and I basically only tested the "Remapper (Axis Merger)" plugin...

raron

Just a quick heads-up that the axis previews in "Remapper (Axis Merger)" plugin don't show, and layout is a bit messed up (UCR v0.1.12). From looking in Control Panel - Game Controllers while testing, it seems I can't use the same axis input for different axis's outputs anymore? I have a setup with ...

raron

So. get me this straight: Can you or can you not map a keyboard or mouse to a virtual joystick (vjoy) :( . I can do this inside UCR, but it makes no response on the vjoy Monitor or windows monitor. :( I have the same issue of vJoy seemingly not being remapped from the latest UCR (Alpha 0.1.9). I ca...

raron

I figured it out! It was.. failure to check Game Controller Calibration issue (or in other words PEBKAC.. yeah a bit embarrassing! :P). Actually, it was enough to just press "Reset to default" in the Settings tab of vJoy #1's Device properties (in Control Panel - Game Controllers), and all axis on v...

raron

This has something to do with my windows install, and nothing with your code as you say, nor vJoy. As it happens, I have another partition with windows, but I don't use it much. It's the same (Windows 7) on the same PC, but not as much installed stuff. So I got the idea to test vJoy there.. I alread...

raron

I actually haven't tried it, until now. And yes, the digital behavior is still present on vJoy #1, all axis except the first. If I hit 50% exactly on the feeder they are at the midpoint, or else they are fully off or on (0%, 50%, 100%). On vJoy #2 they work as expected. I presume also on vJoy #3 etc...

raron

Ugh, I must be blind or something, downloaded your CvJoyInterface.ahk now and ran the test script. In addition, I hadn't updated AutoHotKey in a while, but I've done that now. With THAT CvJoyInterface.ahk, it worked, but just as before; my vJoy #1 axis one is analog, but the rest on vJoy #1 is digit...

raron

Yes, the digital axis seems only to happen with vJoy stick 1, except on its first axis (X).
Did a quick test just now, had to remove the quotation marks (") in the include line, otherwise it couldn't load the include file for some reason. But then I get this error:

raron

Just FYI, I've now tested the gamepad I have (a Logitech dual action USB), as well as the HOTAS throttle (2 axis) and joystick, merging 2 axis to a virtual joystick axis. I tried all 8 sliders but only on two virtual joysticks. On vJoy #1, only the first virtual axis (X) works normally (analog), the...

raron

Ok. I have no problems with that (I don't have those programs).

Yes, the UCR sliders behave normal (analog), so maybe it isn't UCR.

raron

Well, I suppose I could do that if that would help, and if you want. A bit depending on what you will be doing with it

I don't have TeamViewer or anything similar atm, so I'll have to install it first, and we have to find a time I guess.

raron

The two inputs are the G27 pedals yeah? Will have to try when i'm at home at the weekend as i don't have my wheel here - because as you saw from my recording I canot reproduce with this gamepad. The only difference I see is that you have invert on for input 2 - I tried that and it was still analogu...

raron

Awesome! That basically solved it, no more flickering

There's still the issue with vJoy 1 being "digital" on subsequent axis, but now I can just use vJoy 2 for the rest. I've only briefly tried it just now, but it seems to work.

Thanks for looking into the problem!

raron

Ah, that answers the issue with using more than one vJoy (which was something I tried as a work-around btw). But what about using only one vJoy but merge to different axis?

Here is a quick'n'dirty gif of my issue (sorry about the low quality):

raron

Didn's see your answer while editing my last post

The merging issue happens with both UJR and UCR. Yes they seem to work in UJR / UCR for me also, but monitoring vJoy shows it's not (Except on axis 1, for the first vJoy).

raron

Nice! Thanks for answering. No worries about not having the time right now. Yes, you'd need Horizons for the SRV buggy (But you can spot the issues with "vJoy Monitor" or Game Controllers in Control Panel). I feared my explanation might be a bit messy. It's two issues basically: 1 - Axis merges on v...

raron

Hi, and thanks for these great remapping utilities (UJR / UCR). Been using UJR a while to remap pedals to a rudder control. But I discovered a bug just now, since I decided to change some controller settings. I'm not sure if it's with UJR/UCR, or vJoy though, just thought I'd mention this here anywa...

raron

Long time since I've been meddling with this. I just wanted to say I guess this is obsolete now that HIDMacros is obsolete and replaced with LUAMacros. I stumbled upon this from this fb page: https://www.facebook.com/LinusTech/videos/976735192422926/ Oh and yeah, seems I'm about a year late with tha...

raron

That's a good question. Actually, I don't have any use for it, not atm at least. I basically did it out of a bit of boredom I suppose (IE procrastination :P). What got me started was that someone who had an extra keypad, asked if it was possible to use it for extra functions in a game. The extra key...

Search found 22 matches

Re: Universal Control Remapper (UCR) - v0.1.12 7th Mar 2017

Re: Universal Control Remapper (UCR) - v0.1.12 7th Mar 2017

Re: Universal Control Remapper (UCR) - v0.1.12 7th Mar 2017

Re: Universal Control Remapper (UCR) - v0.1.9 26th Dec 2016

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Universal Joystick Remapper (UJR) - v6.10 2nd Nov 2015

Re: Multiple keypads-to-virtual-joysticks remapping work-around

Re: Multiple keypads-to-virtual-joysticks remapping work-aro