Hi, and thanks for these great remapping utilities (UJR / UCR). Been using UJR a while to remap pedals to a rudder control.
But I discovered a bug just now, since I decided to change some controller settings. I'm not sure if it's with UJR/UCR, or vJoy though, just thought I'd mention this here anyway.
Here is the thing: On virtual joystick 1, I just can't merge to any other axis than virtual axis 1 (X), and have it still be continuous. They then become digital, for merging it is 0%, 50% (sometimes) and 100%. Not too usable. This happened to every other axis, sliders etc, except axis 1(X), which works (and which I've used for some time now via UJR). One thing to note is that the sliders in UJR (and UCR) are still continuous, but the vJoy axis (as monitored from game controllers or the vJoy monitor) is not. So maybe the fault is with vJoy?
I just discovered UCR btw, and that enabled to also use another virtual joystick as output at the same time (And wow, what a brilliant program btw!).
Basically, I have a G27 that I want to use like this with a game (Elite Dangerous):
1. Use G27 clutch and accelerator pedal for rudder control (ship control)
2. Use G27 brake and accelerator pedals as SRV throttle (forwards/backwards control for the SRV surface buggy).
3. Increase sensitivity for the G27 wheel, so I don't have to turn it so much (using it for the SRV)
I could not solve problem 1 and 2 above with UJR or UCR alone, but as G27 have a built-in combined axis for brake and accelerator (axis "U"), I use that and then UJR/UCR for combining the other two. This works well.
However, remapping the steering wheel didn't work too well, pedals (or other axis inputs?) seems to interfere and make the axis "flicker" a bit. The same happens if I add another virtual joystick and remap or merge axis to that one as well. However, on subsequent vJoys, I could actually merge to any vJoy axis, and they still worked continuously (as one would expect). Except for the flickering issue.
(Reason for mapping the wheel was to increase the sensitivity, Logitech Profiler doesn't seem to work, even when setting persistent profile, nor does game controller settings for G27 in windows work atm, sigh.. .900 deg rotation it is).
Using windows 7 Ultimate, 64-bit. I used UJR v6.6 with vJoy 2.05 until now, and updated it to the one last updated vJoy of 2016-02-03 (
https://sourceforge.net/projects/vjoystick/). I also updated UJR to v6.10, same results. Then I discovered UCR 0.013, which I use now.
(Hope this explanation isn't too messy...)