I hadn't fully developed the two new options (and one more):
- Turn on Click Lock
- Disable Wheel Click
- Snap To Default Button
with a per mouse setting, so here it is in the Beta version for testing:
https://www.eithermouse.com/Beta/
its about time to make a simple gui and an advanced gui, thats too many options in a small window, i don’t like it
EitherMouse 0.8 - Multiple mice, individual settings...
Re: EitherMouse 0.8 - Multiple mice, individual settings...
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
-
- Posts: 8
- Joined: 17 Sep 2019, 20:35
Re: EitherMouse 0.8 - Multiple mice, individual settings...
since the last 1 or 2 versions I have the problem that the mouse cursor vanishes a lot, which is really disturbing my workflow since I'm constantly searching for it. Happens over text input fields like this one but also over plain text (for example your footer "Either Mouse - Multiple ....."). Any way to fix that? Would be great!
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Hmm, thats not good... are you using MultiCursor mode? Windows 10?
I’m sure we can fix it but i haven’t seen this problem, can you try out v0.759 and see if its back to normal:
www.EitherMouse.com/Archive
I’m sure we can fix it but i haven’t seen this problem, can you try out v0.759 and see if its back to normal:
www.EitherMouse.com/Archive
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
-
- Posts: 2
- Joined: 18 Sep 2019, 16:08
Re: EitherMouse 0.8 - Multiple mice, individual settings...
I just discovered your ahk script today. Either it's not working correctly for me or I can't figure out how to configure it. How do I get it to show me different settings for each mouse? I tried popping up the window with one mouse, configuring accordingly, then popping up the window with the other mouse, but the settings seem to be common regardless of which mouse I'm using. I can't find any instructions on how to get it to recognize that there are 2 mice and configure them individually.
Re: EitherMouse 0.8 - Multiple mice, individual settings...
as soon as you start using the second mouse the settings will change to that one... The text box should change from Mouse1 to Mouse2... if it doesn’t then its not detecting the mice properly, in which case go to “diagnostic info” from the advanced menu and copy that info to me and wemll figure it out
thanks for the feedback, you could also try v0.759 from
www.EitherMouse.com/Archive
and see if you get different results, as I made some changes recently that might be causing problems, like for the previous poster above
- joel
thanks for the feedback, you could also try v0.759 from
www.EitherMouse.com/Archive
and see if you get different results, as I made some changes recently that might be causing problems, like for the previous poster above
- joel
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
-
- Posts: 8
- Joined: 17 Sep 2019, 20:35
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Will try with the old version and report, but no no multi cursor. I mainly use it for left hand click swapping and cursor mirroring. And as I have a surface dial and a "nob kontrol" I need to disable that for itgwarble wrote: ↑18 Sep 2019, 08:55Hmm, thats not good... are you using MultiCursor mode? Windows 10?
I’m sure we can fix it but i haven’t seen this problem, can you try out v0.759 and see if its back to normal:
www.EitherMouse.com/Archive
Re: EitherMouse 0.8 - Multiple mice, individual settings...
cool, those look like fun devices!
if you’re not using multicursor mode, does it still happen if you don’t mirror the cursor? If its over any text, maybe your “ibeam” cursor got messed up, try using the windows mouse controlpanel to set the cursors again
also, both of you guys may want to try the latest version which i’ve been doing another round of code cleanup and improvements, maybe i’ve fixed one or both of your problems inadvertantly:
www.EitherMouse.com/Beta
if you’re not using multicursor mode, does it still happen if you don’t mirror the cursor? If its over any text, maybe your “ibeam” cursor got messed up, try using the windows mouse controlpanel to set the cursors again
also, both of you guys may want to try the latest version which i’ve been doing another round of code cleanup and improvements, maybe i’ve fixed one or both of your problems inadvertantly:
www.EitherMouse.com/Beta
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
-
- Posts: 8
- Joined: 17 Sep 2019, 20:35
Re: EitherMouse 0.8 - Multiple mice, individual settings...
ok, in the windows mouse setting everything was still set to default, the beta version didn't help neither, BUT disabling swapping cursor and reenabling it again fixed the problem! So thank you!
btw the "hover over a link" hand is working fine in e.g. the browser but is not mirrored in Windows Mail (10, 1809), could you fix that?
btw the "hover over a link" hand is working fine in e.g. the browser but is not mirrored in Windows Mail (10, 1809), could you fix that?
Re: EitherMouse 0.8 - Multiple mice, individual settings...
hmm, not sure why that would have fixed it, but i will look into it, thanks again
Edit: yeah pretty obvious bug i was able to recreate in the beta version but not the current regular version 0.81... i just uploaded beta v0.84 if you want to try it out
as for the Windows Mail cursor, maybe it is creating its own cursor? i don’t use it, but try setting your cursors in the control panel to something different and see if Mail displays it... if not there’s not really a way for EitherMouse to override it
Edit: yeah pretty obvious bug i was able to recreate in the beta version but not the current regular version 0.81... i just uploaded beta v0.84 if you want to try it out
as for the Windows Mail cursor, maybe it is creating its own cursor? i don’t use it, but try setting your cursors in the control panel to something different and see if Mail displays it... if not there’s not really a way for EitherMouse to override it
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
-
- Posts: 2
- Joined: 18 Sep 2019, 16:08
Re: EitherMouse 0.8 - Multiple mice, individual settings...
0.759 worked. Thank you! This is awesome!gwarble wrote: ↑18 Sep 2019, 16:58as soon as you start using the second mouse the settings will change to that one... The text box should change from Mouse1 to Mouse2... if it doesn’t then its not detecting the mice properly, in which case go to “diagnostic info” from the advanced menu and copy that info to me and wemll figure it out
thanks for the feedback, you could also try v0.759 from
www.EitherMouse.com/Archive
and see if you get different results, as I made some changes recently that might be causing problems, like for the previous poster above
- joel
-
- Posts: 8
- Joined: 17 Sep 2019, 20:35
Re: EitherMouse 0.8 - Multiple mice, individual settings...
0.84 seems to have fixed my problem, thank you!
However, before, the surface dial was found as a mouse and I could configure it, now eithermouse only detects one mouse.Any idea what might have triggered that change? oh and (at least) 0.83 triggered a virus alert with windows defender "Trojan:Win32/Zpevdo.B"
However, before, the surface dial was found as a mouse and I could configure it, now eithermouse only detects one mouse.Any idea what might have triggered that change? oh and (at least) 0.83 triggered a virus alert with windows defender "Trojan:Win32/Zpevdo.B"
Re: EitherMouse 0.8 - Multiple mice, individual settings...
ok good, thanks for reporting back
now try unchecking “ignore zero device” from the advanced menu... unfortunately the touch screen and touch pad on a surface both register as a software mouse (ie no device handle, ie “zero device”, i plan to rename the option) i assume the surface dial is the same
now try unchecking “ignore zero device” from the advanced menu... unfortunately the touch screen and touch pad on a surface both register as a software mouse (ie no device handle, ie “zero device”, i plan to rename the option) i assume the surface dial is the same
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
Re: EitherMouse 0.8 - Multiple mice, individual settings...
sorry i don’t know what to do about the false positives except tell people to ignore it and/or submit it to your vendormarkusschloesser wrote: ↑25 Sep 2019, 18:39oh and (at least) 0.83 triggered a virus alert with windows defender "Trojan:Win32/Zpevdo.B"
Send a report to Microsoft about a misidentified file (false positive):
https://www.microsoft.com/en-us/wdsi/filesubmission
https://www.microsoft.com/en-us/security/portal/submission/submit.aspx
Reporting to other vendors:
https://www.techsupportalert.com/content/how-report-malware-or-false-positives-multiple-antivirus-vendors.htm
Add an exclusion to Windows Defender Antivirus:
https://support.microsoft.com/en-us/help/4028485/windows-10-add-an-exclusion-to-windows-defender-antivirus
More links:
http://blog.nirsoft.net/2009/05/17/antivirus-companies-cause-a-big-headache-to-small-developers/
http://blog.nirsoft.net/2015/10/18/antivirus-statistics-and-scores-according-to-false-positives-of-nirsoft-tools/
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Hi, Wondering if you would consider making EitherMouse installable from Chocolatey to make installation automatable by multiple products?
Home: https chocolatey.org Broken Link for safety
How to Create Packages: https chocolatey.org /docs/create-packages Broken Link for safety
Home: https chocolatey.org Broken Link for safety
How to Create Packages: https chocolatey.org /docs/create-packages Broken Link for safety
-
- Posts: 3
- Joined: 29 Aug 2019, 09:13
Re: EitherMouse 0.8 - Multiple mice, individual settings...
New version works Thank you!
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Is there a way to view and/or edit all of the EitherMouse managed mouse configs?
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Bill Board: great, thanks for the feedback
c600g: I will look into chocolatey, but I can't say I see the real benefit to a system like that
There currently isn't a way to do that, new gui planned but it will take some time. For now you have to use the mouse you want to adjust.
c600g: I will look into chocolatey, but I can't say I see the real benefit to a system like that
There currently isn't a way to do that, new gui planned but it will take some time. For now you have to use the mouse you want to adjust.
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Choco: Thank you for considering. "Real benefit": It's for your users. When setting up new machines (laptop, desktop, VMs), manual installs are time consuming. Automated installs (a la choco) make it very easy to install (and update).
View mouse configs: Understood on UI feature. Where does EitherMouse store the data? Is it an ascii file so can easily see it? With a few different configurations in use on my laptop, the "Mouse 4" is not always "Mouse 4" - changes/depends on the used port. I've wanted to see the settings of another config to know what to set the current one to.
View mouse configs: Understood on UI feature. Where does EitherMouse store the data? Is it an ascii file so can easily see it? With a few different configurations in use on my laptop, the "Mouse 4" is not always "Mouse 4" - changes/depends on the used port. I've wanted to see the settings of another config to know what to set the current one to.
Re: EitherMouse 0.8 - Multiple mice, individual settings...
The configuration data is stored in the registry, HKCU\Software\EitherMouse\, you can manually look through and see what is saved for each mouse.
As for chocolatey, I will have to try it to see how its faster/more automate-able than simple command line parameters like "/install /quiet"
As for chocolatey, I will have to try it to see how its faster/more automate-able than simple command line parameters like "/install /quiet"
EitherMouse - Multiple mice, individual settings . . . . www.EitherMouse.com . . . . forum . . . .
Re: EitherMouse 0.8 - Multiple mice, individual settings...
Choco provides the centralized infra to automatically download and install Windows apps, removing the painful manual process. Choco doesn't replace the Windows installer, it runs each app's install program. Choco wraps around each app's installer with versioning so users can install hundreds of apps, yours included, with one command. e.g. "choco install EitherMouse" to download and install the latest version. e.g. "choco update EItherMouse" to check if the choco repo has a new version and, if so, download and install it.
Return to “Scripts and Functions (v1)”
Who is online
Users browsing this forum: No registered users and 33 guests