AHK Studio

[metacognition]

@joedf yep, it sure does. Thank you!

Code: Select all

[*]
indent_style = tab 
indent_size = 5

[joedf]

@metacognition Cool! I guess we've both learned something ahaha

[mslonik]

Hi,

I try (since hours) solve the issue with debugger and AHK Studio. Whenever I try to run debugger I get message box with bare value saying

10048

Sometimes additionally I get the message box saying

Debugger failed, Please close all instances of <my_script.ahk> and try again

and

---------------------------
Could not close the previous instance of this script. Keep waiting?
---------------------------
Yes No
---------------------------

Not enough clue to me to figure out what's wrong. When debugger stops I observe pretty heavy load on processor in Task Manager for, I believe, script under debugging. The script under debugging cannot be closed by its SystemTray icon-menu feature.

I've searched this forum, but unfortunately the only tip I have found doesn't work for me: in my opinion I have full privileges to the folder from where I run AHK Studio.

Surprisingly on my second PC it works flawlessly. Any suggestions?

Kind regards, mslonik ()


PS. Can this message by related to 'bitness' of the scripts? I've noticed that all my scripts are displayed by task manager as 64-bits except... AHK Studio (!). Then script under debugging is also shown as 32-bit AutoHotkey Unicode.

[mslonik]

Continuing:

1. I've checked if my problem isn't related to UAC (User Account Control) as found in FAQ and suggested in one of the other threads. So I asked my system administrator to temporarily elevate rights to admin level when running AHK Studio.
Result: it didn't help, still the same message occurred.

2. 'Bitness' theory.
I've tried to run AHK Studio manually, as follows:

Code: Select all

c:\Program Files\AutoHotkey>AutoHotkeyU64.exe c:\AHK-Studio-Master\AHK-studio.ahk

and

Code: Select all

c:\Program Files\AutoHotkey>AutoHotkeyU32.exe c:\AHK-Studio-Master\AHK-studio.ahk

Result: it didn't help, still the same message occurred.

Kind regards, mslonik ()

[Janusz]

Dear specialists,
I Am very nicely impressed by The user interface and big amount of supported Hotkeys build in to AHK studio. Its 100 % screen readers friendly user interface, fast responsiveness, reliability make really professional Integrated development environment from Ahk studio. Its Github integration allow professional source code storage in The cloud. I have big plea.
Does AHK studio itself contain some GUi creator? Or I AM analysing its GUI with screen reader that there is no GUI creation tools build in to this excellent product? If no, no problem, I will use GUI designer build in to Autogui.

[jsong55]

Anyone know how to activate auto save and update? Particularly necessary when you editing 2 parts of the same script using separate windows.

I have no such issues in VS CODE

[rdhu]

'New' Functionality
I don't understand the intended behavior of the File->New (ctrl-N) functionality. Help states it 'Creates a new project.' My expectation was that it would request a new project name, create a folder of that name under Projects, create a file of same name and, potentially, save that new file.

Insights appreciated.

[hasantr]

Automatic backup is performed in a folder called Backup in the directory where the script is located. In older versions, backups were stored in a single backup folder. Can I use this feature in the old version?

[noname6500]

How do we disable autosave? The one in program options doesnt work. I close the thing it I get no confirmation to save or not.

[oxyoxy]

is there anyway to only show the debug logs from the script that i'm currently on

the scenario is something like :
1) running [A Script] that is not matured yet, so there are a lot of debug logs from it, in case something went wrong
2) learning something new, so while running [A Script], im editing [B Script] where debug log is important, but there are a lot of debug logs from [A Script] showing in the log window

so im thinking if there's an option to not show the logs from [A Script] in the log window when im actually editing [B Script]

[Galaxis]

@maestrith
I just upgraded to AHK Studio from SCITE. So far, it's amazing, but I have one issue.

I'm using AHK version H, which works fine as long as there's no multithreading in the script.

AHK Studio reads a new thread as an undefined function and throws an error.

Is there a plugin I need or a workaround available? Or no dice?

[hasantr]

@maestrith
I just upgraded to AHK Studio from SCITE. So far, it's amazing, but I have one issue.

I'm using AHK version H, which works fine as long as there's no multithreading in the script.

AHK Studio reads a new thread as an undefined function and throws an error.

Is there a plugin I need or a workaround available? Or no dice?

Did you replace the ahk.exe in the programfiles with the AHK_H version?

[newbie007]

Anyone else stuck at "Downloading ahk.xml ... Please Wait..." Window at the second opening of AHKStudio?
How to fix this?

[yousef_badr23]

Continuing:

1. I've checked if my problem isn't related to UAC (User Account Control) as found in FAQ and suggested in one of the other threads. So I asked my system administrator to temporarily elevate rights to admin level when running AHK Studio.
Result: it didn't help, still the same message occurred.

2. 'Bitness' theory.
I've tried to run AHK Studio manually, as follows:

Code: Select all

c:\Program Files\AutoHotkey>AutoHotkeyU64.exe c:\AHK-Studio-Master\AHK-studio.ahk

and

Code: Select all

c:\Program Files\AutoHotkey>AutoHotkeyU32.exe c:\AHK-Studio-Master\AHK-studio.ahk

Result: it didn't help, still the same message occurred.

Kind regards, mslonik ()

I have the same issue, even after trying these fixes, did you figure out hot to fix it?

[mslonik]

@yousef_badr23
No, I didn't. Actually I've changed IDE to Visual Studio Code.

Kind regards, mslonik

[yousef_badr23]

Continuing:

1. I've checked if my problem isn't related to UAC (User Account Control) as found in FAQ and suggested in one of the other threads. So I asked my system administrator to temporarily elevate rights to admin level when running AHK Studio.
Result: it didn't help, still the same message occurred.

2. 'Bitness' theory.
I've tried to run AHK Studio manually, as follows:

Code: Select all

c:\Program Files\AutoHotkey>AutoHotkeyU64.exe c:\AHK-Studio-Master\AHK-studio.ahk

and

Code: Select all

c:\Program Files\AutoHotkey>AutoHotkeyU32.exe c:\AHK-Studio-Master\AHK-studio.ahk

Result: it didn't help, still the same message occurred.

Kind regards, mslonik ()

I have the same issue, even after trying these fixes, did you figure out hot to fix it?

I managed to fix it by two steps: First, open the script through the Open dialogue of AHK-studio, not through right-clicking the script then "Edit Script". Second, close the debugging window and the script if the 10048 error appears. Hope that helps

[robodesign]

Oh my f*ckin' God !

I opened my biggest project with it. Quick Picto Viewer , the main ahk file.

I wont comment on the User interface of this editor, or its features... but... what it did is despicable.

Without asking me, it opened the includes [all the included ahk files] , and then, it resaved them with the wrong encoding. and borked special characters . Is this a known bug?!

The efforts on the project are definitely huge, but... this bug should be fixed as soon as possible .

Best regards, Marius.

[mankvl]

Is it possible to make ahk studio san my library files and auto suggest all my functions when I tipe their name in other files? I remember I managed to make it work back in the day, but now I cant :/ it even don't suggest my what to enter if I try to use them

Edit: rly don't get it my all library files are detected and showed on right side, but when I type function name I don't get any suggestions or if I write it correctly doesn't show help with how many variables I need to specify in the function. Do I rly need to add like 100 includes to get auto complete to show all my functions?

[Zoreldo]

I keep getting an error from the AHK-Studio.ahk script. I tried removing/reinstalling it and it still happens. Is this something I'm doing wrong?

Message box says:
---------------------------
AHK-Studio.ahk
---------------------------
Critical Error: Invalid memory read/write.

Line#

Code: Select all

	9989: SetScan(Line)  
	9990: if Code not in 2007,2001,2006,2008,2010,2014,2022,2016,2019
	9991: Return,0
	9992: fn:=[],fn.Code:=Code,fn.Ctrl:=NumGet(A_EventInfo+0)  
	9993: For a,b in CodeGet[Code]
	9993: {
	9994: if (a="Text")  
--->	9995: fn.Text:=StrGet(NumGet(Info+(A_PtrSize*b)),"UTF-8")  
	9996: Else
	9997: fn[a]:=NumGet(Info+(A_PtrSize*b))  
	9998: }
	9998: if (fn.Code)  
	9999: Mem.Push(fn)  
	10000: SetTimer("ReadLater",-50)  
	10001: Return,0

The program is now unstable and will exit.
---------------------------
OK
---------------------------

[Danielsan73]

i'm new on AhkStudio just downloaded and expanded it in a folder, in documents
but when i run script it freezed on the window "downloading ahk.xlm Please wait"
i'm on Windows 11

what to do? how to skip update?