Hi all i have been using ahk for years and are reasonably up to speed however i have a new project that im starting.
essentially im going to put a momentary button with resistor to pull down one of the input pins on the parallel port, i have the inout32dll and the example script for this but there is way to much in there to work out what does what,
has anyone got an example script that monitors one pin and when it changes fire of a subroutine that i can take a look at and figure it out from there.
thanks in advance
kds
simple parallel port script help
-
- Posts: 1
- Joined: 08 Jul 2020, 17:43
Re: simple parallel port script help
I found this on github. Parellel port interfacing using PC. Description means it is written in 2009.
Second here.
And one more here --> link to forum thread
Second here.
And one more here --> link to forum thread
Re: simple parallel port script help
Not my cup of tea (due to a lack of expertise) but I HTH ...
https://autohotkey.com/board/topic/78998-lpt-port-io-control-32-in-12-out-leds-relays-switches/
https://autohotkey.com/board/topic/59161-parallel-port-library/
If links are the same as Frosti's feel free to ignore mine without feeling guilty in any form
Good luck
https://autohotkey.com/board/topic/78998-lpt-port-io-control-32-in-12-out-leds-relays-switches/
https://autohotkey.com/board/topic/59161-parallel-port-library/
If links are the same as Frosti's feel free to ignore mine without feeling guilty in any form
Good luck
Who is online
Users browsing this forum: CrowexBR and 276 guests