Welcome and if you need help

Discuss issues and requests related with the forum software
Cardinal
Posts: 1
Joined: 10 Oct 2016, 01:50

Re: Welcome and if you need help

13 Oct 2016, 00:34

I have the same problem ("Take a break") ... both from my work station and my home station. I do not use a proxy or tor.
User avatar
joedf
Posts: 8937
Joined: 29 Sep 2013, 17:08
Location: Canada
Contact:

Re: Welcome and if you need help

13 Oct 2016, 05:15

Ok, we will look into it. :?
Image Image Image Image Image
Windows 10 x64 Professional, Intel i5-8500, NVIDIA GTX 1060 6GB, 2x16GB Kingston FURY Beast - DDR4 3200 MHz | [About Me] | [About the AHK Foundation] | [Courses on AutoHotkey]
[ASPDM - StdLib Distribution] | [Qonsole - Quake-like console emulator] | [LibCon - Autohotkey Console Library]
CooLTanG
Posts: 3
Joined: 15 Oct 2016, 00:05

Re: Welcome and if you need help

17 Oct 2016, 16:16

Cardinal wrote:I have the same problem ("Take a break") ... both from my work station and my home station. I do not use a proxy or tor.
same issue here
arrrghhh
Posts: 11
Joined: 20 Nov 2015, 17:09

Re: Welcome and if you need help

17 Oct 2016, 17:16

Ditto as well. Surprised if this post will actually submit, I haven't been able to submit any posts elsewhere for a day or so now.

Edit - hey, that actually worked! I've been trying to post a response to a thread in the 'tutorials' section (not even post a new thread, just respond to a post) and have not been able to. I keep getting the same "Take a break!!" message!

Thanks!!

Edit 2 - well, I was finally able to create the post in that other thread as well - hopefully the issue is fixed!
User avatar
joedf
Posts: 8937
Joined: 29 Sep 2013, 17:08
Location: Canada
Contact:

Re: Welcome and if you need help

18 Oct 2016, 08:22

You sure you're not using a proxy or TOR?
Image Image Image Image Image
Windows 10 x64 Professional, Intel i5-8500, NVIDIA GTX 1060 6GB, 2x16GB Kingston FURY Beast - DDR4 3200 MHz | [About Me] | [About the AHK Foundation] | [Courses on AutoHotkey]
[ASPDM - StdLib Distribution] | [Qonsole - Quake-like console emulator] | [LibCon - Autohotkey Console Library]
arrrghhh
Posts: 11
Joined: 20 Nov 2015, 17:09

Re: Welcome and if you need help

18 Oct 2016, 08:45

joedf wrote:You sure you're not using a proxy or TOR?
I never answered that question previously, and I am positive I am not using TOR. At work, we could be on a proxy - I don't think we are, but I'll doublecheck. I'm definitely not at home, and I had the issue in both locations the other day.
User avatar
tank
Posts: 3122
Joined: 28 Sep 2013, 22:15
Location: CarrolltonTX
Contact:

Re: Welcome and if you need help

18 Oct 2016, 17:08

Are you working from a device that responds to port web based requests?
We are troubled on every side‚ yet not distressed; we are perplexed‚
but not in despair; Persecuted‚ but not forsaken; cast down‚ but not destroyed;
Telegram is the best way to reach me
https://t.me/ttnnkkrr
If you have forum suggestions please submit a
Check Out WebWriter
vijay666
Posts: 5
Joined: 03 Jan 2017, 10:56

Re: Welcome and if you need help

03 Jan 2017, 22:55

Hi! may i know what script i can use for Razer Macro Seconds Delay on Letter R? Using Autohotkey
User avatar
joedf
Posts: 8937
Joined: 29 Sep 2013, 17:08
Location: Canada
Contact:

Re: Welcome and if you need help

05 Jan 2017, 16:31

No such script currently exists to my knowledge.
You probably will have to write such as script. If you need help, please post your questions in the "Ask For Help" Section:
https://autohotkey.com/boards/viewforum.php?f=5
Image Image Image Image Image
Windows 10 x64 Professional, Intel i5-8500, NVIDIA GTX 1060 6GB, 2x16GB Kingston FURY Beast - DDR4 3200 MHz | [About Me] | [About the AHK Foundation] | [Courses on AutoHotkey]
[ASPDM - StdLib Distribution] | [Qonsole - Quake-like console emulator] | [LibCon - Autohotkey Console Library]
4GForce
Posts: 553
Joined: 25 Jan 2017, 03:18
Contact:

Re: Welcome and if you need help

18 Mar 2017, 02:07

Hi,
I was trying to reply to this post: https://autohotkey.com/boards/viewtopic.php?f=5&t=29313
I copy/pasted some of his code and was trying to add a code block to my response but after narrowing it down this part ( see below ) gets me a weird message.
I'm pretty sure I already used SubStr in a previous post.
Actually I just realised it also happens when its not even in a

Code: Select all

 block.
 
This ...
[img]https://cloud.githubusercontent.com/assets/25257792/24069777/daef7676-0b86-11e7-920b-af21fa2c25ed.png[/img]

Gets me this ...
[img]https://cloud.githubusercontent.com/assets/25257792/24069819/b2790e18-0b87-11e7-8aca-a7be1ffb1739.png[/img]

Thank you.
User avatar
nnnik
Posts: 4500
Joined: 30 Sep 2013, 01:01
Location: Germany

Re: Welcome and if you need help

18 Mar 2017, 03:39

I can confirm this
Recommends AHK Studio
4GForce
Posts: 553
Joined: 25 Jan 2017, 03:18
Contact:

Re: Welcome and if you need help

18 Mar 2017, 03:59

nnnik wrote:I can confirm this
I mean I don't want to point fingers ... forgive my poor english but ...
This was posted before Tank fixed the slow forum issue: https://autohotkey.com/boards/viewtopic ... 45#p137845 ( And it contains SubStr )
Tank post: https://autohotkey.com/boards/viewtopic ... 49#p137849
It's probably a necessary drawback or just me with bad hunch.
Hope that helps troubleshooting the issue.
Thank you for your time !
User avatar
tank
Posts: 3122
Joined: 28 Sep 2013, 22:15
Location: CarrolltonTX
Contact:

Re: Welcome and if you need help

18 Mar 2017, 07:07

Code: Select all

substr()
that mmight have been my fault. Should be resolved now
We are troubled on every side‚ yet not distressed; we are perplexed‚
but not in despair; Persecuted‚ but not forsaken; cast down‚ but not destroyed;
Telegram is the best way to reach me
https://t.me/ttnnkkrr
If you have forum suggestions please submit a
Check Out WebWriter
4GForce
Posts: 553
Joined: 25 Jan 2017, 03:18
Contact:

Re: Welcome and if you need help

18 Mar 2017, 10:06

That was quick !
SubStr("Tank you!", 1, 4)
ronaldl
Posts: 4
Joined: 10 Oct 2017, 03:06

Re: Welcome and if you need help

12 Oct 2017, 13:00

i'm new to forums. I don't know if there is a limit to my posting for review... but i can't seem to post successfully. At least that is what it appears to me. But next day i see my post. I tried to reply but it seems to fail when i submit... i guess i'll wait till tomorrow to see if this will resolve to an actual reply.

Can anybody tell me if this may be a feature for reviewing new user posts?
User avatar
joedf
Posts: 8937
Joined: 29 Sep 2013, 17:08
Location: Canada
Contact:

Re: Welcome and if you need help

12 Oct 2017, 14:02

I just reviewed and approve your post, ronaldl. Sorry it might be a bit slow sometimes. You just need a few posts till (less than 5 i think), you can then post without approval.
Image Image Image Image Image
Windows 10 x64 Professional, Intel i5-8500, NVIDIA GTX 1060 6GB, 2x16GB Kingston FURY Beast - DDR4 3200 MHz | [About Me] | [About the AHK Foundation] | [Courses on AutoHotkey]
[ASPDM - StdLib Distribution] | [Qonsole - Quake-like console emulator] | [LibCon - Autohotkey Console Library]
ronaldl
Posts: 4
Joined: 10 Oct 2017, 03:06

Re: Welcome and if you need help

12 Oct 2017, 21:48

joedf wrote:I just reviewed and approve your post, ronaldl. Sorry it might be a bit slow sometimes. You just need a few posts till (less than 5 i think), you can then post without approval.
Thanks Joedf. I didn't notice any information regarding the post approval or I would have waited patiently. :P Okay this is post #3 then. hehe.
User avatar
Off Topic
Posts: 43
Joined: 07 Oct 2017, 20:57

Re: Welcome and if you need help

24 Oct 2017, 13:23

Image Hello, what's the local etiquette for bumping posts, if I don't get a response for an Ask For Help thread for a couple days and it gets pushed back a few pages? Is there a recommended amount of time (like "three days") before doing this?

I saw bumping mentioned in the FAQ, but it kind of makes it sound board-specific and I didn't see any actual timeframes mentioned.

Return to “Forum Issues”

Who is online

Users browsing this forum: No registered users and 23 guests